Ingersoll-Rand ARO PX15P A Series, Руководство оператора

Страница: 1 / 12

OPERATOR’S MANUAL PX15P-XXX-XXX-AXXX
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE
RELEASED: 9-5-03
REVISED: 8-31-17
(REV: T)
1-1/2" DIAPHRAGM PUMP
1:1 RATIO (NON-METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
637391-XXX
for fl uid section repair
with
seats (see page 5).
637391-XX for fl uid section repair without seats (see page 5).
NOTE: This kit also contains several air motor seals which will
need to be replaced.
637389
for air section repair (see page 7).
637390-X major air valve assembly (see page 8).
PUMP DATA
Models
. . . . . . see Model Description Chart on page 2 for
“-XXX” options
Pump Type . . Non-Metallic Air Operated Double Diaphragm
Material
. . . . . see Model Description Chart
Weight . . . . . . PX15P-FKS-XXX-AXXX. 63.94 lbs (29.00 kgs)
PX15P-FPS-XXX-AXXX . 42.60 lbs (19.32 kgs)
PX15P-YKS-XXX-AXXX . 55.94 lbs (25.37 kgs)
PX15P-YPS-XXX-AXXX . 42.30 lbs (19.19 kgs)
PX15E-FES-XXX-AXXX . 43.14 lbs (19.57 kgs)
Maximum Air Inlet Pressure
. . . . . . . . 120 psig (8.3 bar)
Maximum Material Inlet Pressure
. . . 10 psig (0.69 bar)
Maximum Outlet Pressure . . . . . . . . . . 120 psig (8.3 bar)
Maximum Flow Rate ( fl ooded inlet)
. 123.1 gpm (465.9 lpm)
Displacement / Cycle @ 100 psig
. . . . 0.617 gal (2.34 ltrs)
Maximum Particle Size . . . . . . . . . . . . . 1/4” dia. (6.4 mm)
Maximum Temperature Limits (diaphragm / ball / seat
material)
E.P.R / EPDM . . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)
Hytrel® . . . . . . . . . . . . . . . . . . . -20° to 180° F (-29° to 82° C)
Nitrile® . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
Polypropylene . . . . . . . . . . . . 35° to 175° F (2° to 79° C)
Kynar® PVDF . . . . . . . . . . . . . . 10° to 200° F (-12° to 93° C)
Santoprene® . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
PTFE. . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)
Viton® . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)
Dimensional Data
. . . . . . . . . . . . . . . . . . . see page 10
Mounting Dimensions
. . . . . . . . . . . . . . 8.687” x 14.937”
(220.7 mm x 379.4 mm)
Noise Level @ 70 psig, 60 cpm
c
. . . . . . 81dB(A)
d
c
Tested with mu ffl er 93139 assembly installed.
d
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (LA
eq
) to meet the intent of ANSI
S1.13-2005, CAGI-PNEUROP S5.1. using four microphone locations.
Model PD15X
Model PE15X
Figure 1