Ingersoll-Rand ARO PM05R-B Series, Руководство оператора

Страница: 6 / 12

Page 6 of 12 PM05R-XXX-XXX-BXX (en)

ASSEMBLY TORQUE REQUIREMENTS

NOTE: DO NOT OVERTIGHTEN FASTENERS.
(14) Bolt, 95 - 105 in. lbs (10.7 - 11.9 Nm).
(26) Bolt, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then re-
torque after initial run-in.
(29) Nut, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then re-
torque after initial run-in.
LUBRICATION / SEALANTS

Apply Lubriplate FML-2 grease (94276) to all “O” rings, “U” cups and
mating parts.

Apply anti-seize compound to threads and bolt and nut flange heads
which contact pump case when using stainless steel fasteners.

Apply Loctite® 242® to threads.
PARTS LIST / PM05R-XXX-XXX-BXX FLUID SECTION
View for PM05R-CSS-SXT-BXX (PTFE diaphragm) /
PM05R-CSS-SXL-BXX (Long Life PTFE diaphragm)
configuration.
FOR THE AIR MO-
TOR SECTION, SEE
PAGES 7 AND 8.
Torque Sequence
3
2
7
5
1
8
6
4
COLOR CODE
Diaphragm Ball
Material Color Color
PTFE White White
Santoprene Tan Tan
Santoprene Green N/A
(Backup)
8
Air side Santoprene (tan)
19

19

21
21
22
22
15
61
26
 
26
 
60
14
 
7 5 1
 
27
Figure 3
Fluid side PTFE (white)
7
29

6