background image

OPERATOR’S MANUAL 

PM05R-XXX-XXX-BXX

INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE

RELEASED: 9-20-07

REVISED: 

7-23-21

(REV: L)

1/2" DIAPHRAGM PUMP

1:1 RATIO (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

INGERSOLL RAND COMPANY INC

209 NORTH MAIN STREET – BRYAN, OHIO 43506

 (800) 495-0276 

 FAX (800) 892-6276 

© 2021 

CCN 15282379

arozone.com

SERVICE KITS

Refer to Model Description Chart to match the pump mate-

rial options.

637427-XX

 for fluid section repair (see page 5).

637428

 for air section repair (see page 7).

PUMP DATA

Models

  . . . . . . . . . . . . .   see Model Description Chart for “-XXX”

Pump Type

  . . . . . . . . .   Air Operated Double Diaphragm

Material

  . . . . . . . . . . . .   see Model Description Chart

Weight

  . . . . . . . . . . . . . . . . . . . . . . . . . . .  14.40 lbs (6.53 kgs)

Maximum Air Inlet Pressure

  . . . . .  100 psig (6.9 bar)

Maximum Material Inlet Pressure

  10 psig (0.69 bar)

Maximum Outlet Pressure

  . . . . . . .  100 psig(6.9 bar)

Air Consumption

 @ 40 psig . . . . . . .  1 cfm / gallon (approx.)

Maximum Flow Rate 

(flooded inlet)

  12.0 gpm (45.4 lpm)

Displacement / Cycle @ 100 psig

 .  0.039 gal. (0.15 lit.)

Maximum Particle Size

  . . . . . . . . . .  3/32” dia. (2.4 mm)

Maximum Temperature Limits (Diaphragm / Ball / Seat 

material)

E.P.R. / EPDM . . . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)

Hytrel®  . . . . . . . . . . . . . . . . . . . . -20° to 180° F (-29° to 82° C)

Nitrile  . . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)

Polypropylene  . . . . . . . . . . . . .  32° to 175° F (0° to 79° C)

Santoprene® . . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)

PTFE. . . . . . . . . . . . . . . . . . . . . . .  40° to 225° F (4° to 107° C)

Viton®  . . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)

Dimensional Data

  . . . . . . . . . . . . . see page 9

Noise Level

 @ 70 psig, 60 cpm . 75.0 dB(A)

 The pump sound pressure levels published here have been updated to 

an Equivalent Continuous Sound Level (LA

eq

) to meet the intent of ANSI 

S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.

 

Figure 1

Содержание ARO PM05R-B Series













Отзывы: