PH30X-XXX-XXX-C (en)
Page 7 of 8
PARTS LIST / PH30X-XXX-XXX-C AIR SECTION
ASSEMBLY TORQUE REQUIREMENTS
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
(105) Screw, 35 - 40 in. lbs (4.0 - 4.5 Nm).
(134) Screw, 35 - 40 in. lbs (4.0 - 4.5 Nm).
LUBRICATION / SEALANTS
Apply Lubriplate FML-2 grease to all “O” rings, “U” cups
and mating parts.
Apply anti-seize compound to threads and bolt and
nut flange heads which contact pump case when
using stainless steel fasteners.
Figure 3
200
138
111
139
137
136
107
236
232
233
232
176
134
133
135
146
105
107
166
132
243
244
199
141
140
167
121
174
118
173
169
168
170
171
172
121
173
118
126
101
103
174
127
201
MAJOR VALVE
PILOT VALVE
PART GROUP
Optional 94117
43
147
A replacement Major Valve Service Assembly is available separately, which includes the
following:
637374-6: 105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140, 141, 166, 176 (2), 199, 200, 232
(2), 233, 236 (4), 243 and 244.
4. Install (140) valve insert and (141) valve plate into (135)
valve block. NOTE: Assemble (140) valve insert with
“dished” side toward (141) valve plate. Assemble (141)
valve plate with 2 identification dots toward (199 and
200) gaskets.
5. Assemble (244, 243 and 232) “O” rings, (199 and 200) gas-
kets and (233) adapter plate to (135) valve block.
6. Assemble (132 and 166) gaskets, (176) checks and (232) “O”
ring to (101) body.
7. Assemble (135) valve block and components to (101)
body, securing with (134) screws.
Muffler
