Page 2 of 2
651729 (en)
PN 97999-610
INSTALLATION
Position the two (14) mounting plates on the two post lift
mounting arm (see fi gures 2 and 3).
Using four (16) cap screws and four (13) lock washers, fasten
the mounting plates to the four holes located on the top of the
mounting arm.
Place the air manifold assembly on the mounting plates and
secure using two (11) "U" bolts, four (13) lock washers and four
1.
2.
3.
(12) nuts (see fi gures 1 and 2).
NOTE: The regulator is rotated upward 90° for easier viewing of (5)
gauge.
4. Connect the (9) hose and (10) swivel to the pump air motor
inlet.
5. Connect 1/2" i.d. air line hose to (3) fi lter.
14
14
91350
91350
Figure 2
Figure 3
Y12-4-C Nut (2)
Y14-416 Lock Washer (4)
76254 “U” Bolt
Y6-42-C Cap Screw (2)
90935 Mounting Plate
Mounting plate and parts included with
assembly (1 mounting bracket shown).
