Ingersoll-Rand 315, Информация о продукте

Страница: 3 / 60

80156177_ed3 EN-1
EN
Product Safety Information
Intended Use:
This Sander is designed for smoothing down body filler or shaping and leveling large flat
surfaces.
For additional information refer to Product Safety Information Manual Form 04584967.
Manuals can be downloaded from ingersollrandproducts.com.
Product Specifications
Model
Strokes Per
Minute
Stroke
Length
Pad Size
Average Air
Consumption
Air Consumption
@ Load
spm Inch mm inch mm cfm l/min cfm l/min
315 and 315-EU 3000 1 25.4 2.75 x 17.5 70 x 445 8 226 9 255
Model
Tool
Weight
Overall Length
Sound Level dB (A)
(ISO15744)
Vibration m/s
2
( ISO28927)
lbs kg inch mm † Pressure (L
P
) ‡ Power (L
W
) Level *K
315 and 315-EU 6.1 2.77 15.8 401 93.3 106.3 20.5 1.6
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
*K = Vibration measurement uncertainty
WARNING
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16575706 and table on page 2. Maintenance frequency is shown in
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-off valve 9. Oil
5. Hose diameter