3
LUBRICATION
Ingersoll-Rand No. 50
Ingersoll-Rand No. 100
Always use an air line lubricator with these tools.
We recommend the following Filter-Regulator-Lubricator
(FRL) Unit:
Inside USA use FRL unit #C11-03-G00
Outside USA use FRL unit #C16-C3-A29
After each eight hours of operation,
unless an air line
lubricator is used, inject 1-1/2 cc of Ingersoll-Rand No.
50 Oil into the Air Inlet (10).
INSTALLATION
(Dwg. TPD905-2)
SPECIFICATIONS
■
Tested in accordance with ANSI S5.1-1971 at free speed
♦
Tested to ISO8662-1 loaded with frictionbrake to 9 RPM
•
Tested in accordance with ISO3744
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and the parts be separated by material so that they can be recycled.
F
L
R
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Lubricator
Emergency
Shut-Off
Valve
Regulator
Filter
Compressor
FRL
Drain Regularly
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
Model
Handle
Drive
Impacts/
min
Recommended
Torque Range
■
Sound Level
dB (A)
♦
Vibrations
Level
Inlet
Connection
(Thread)
Minimum
Inside Ø
(Air Hose)
I.D.
Type
in
2
bpm
ft•lbs (N•m)
Pressure
•
Power
m/s
2
NPT
inch (mm)
285A-AP
D
1
700
100-900
(136-1220)
107.0
120.0
7.9
1/2
1/2 (13)
285A-6-AP
D
1 & 6”
extended
anvil
700
100-900
(136-1220)
107.0
120.0
7.2
1/2
1/2 (13)
NOTICE
