Ingenium 2E2S, Техническое руководство по установке

Страница: 72 / 196

72
dimmers
Ref. Ref. NC IN 2 IN 1 Ref.
á RU2S200
regulador universal
universal dimmer
+12V A B Ref.
ingenium
www.ingeniumsl.com
~
L2
NC ~
N
~
N
NC ~
L2
~
L1
NC ~
N
~
N
NC ~
L1
• 2-channel regulation
• Protection against overloads
• Digital control using a 200 regulation points Micro-Controller
• DIN rail mounted (4 modules) or in distribution box with depth 70mm
Designed for achieving a precise digital regulation, receiving commands via the bus or from conventional push buttons
connected to its inputs, using standard control long/short keystroke.
Using the Development System software (SIDE) is possible to configure the ramp control (progressive on-off lighting), or
lower limit and upper limit.
Applicable power supplies depending on the load
(1)
• LED lighting load .................................................................................................. 200W
• Incandescent or halogen loads 230V AC ................................................................. 200W
• Low Voltage loads with a conventional transformer
(2)
incorporated............................. 160W
• Low Voltage loads with a electronic transformer (2) incorporated ................................. 110W
(1) Estimated power calculated with the losses of each type of lighting.
(2) When using transformers, they must be LEADING EDGE or TRAILING-LEADING EDGE type.
Description
RU2S200 is a proportional universal actuator to regulate 2 channels with a
maximum of 200W each. This device allows the regulation of any type of load,
be it halogen, incandescent or LED, with or without incorporated transformer.
It is prepared to avoid the problems of flickering, incompatibilities or other in-
consistencies resulting from lighting regulation.
Inputs
• 2 digital inputs low voltage (SELV) 5V,
minimum activation current 5mA.
• For pushbutton (non-programmable input
linked to the output of the device).
Outputs/Channels
• 2-Channel regulation.
• Max. 200W per channel.
• A minimum load of 10W per channel is required.
Technical Characteristics
* with connection to 230V AC.
Device
Reference
RU2S200
Voltage
Supply
85–265V AC
9–16V DC (BUS)
Current
Consumption
30mA* (BUS)
No.
Inputs
2
Max. Power
per Output
200W
No.
Outputs
2
·
RU2S200
2-channel universal regulator, triac dimmer with BUSing® control
To regulate LED, incandescent or halogen lighting, with or without incorporated transformer.