Copyright© 2022 Ingenico -
Banks and Acquirers
International Holding SAS
All rights reserved
15
AXIUM RX7000 /1022
Do not use any tools when installing or removing the SAM
Card or Micro SD.
CAUTION
During this operation, it is necessary to be in an ESD
protected environment. As this is not very easy, it is
recommended to make this operation using ESD shoes
for example.
WARNING
4.3
Connecting the terminal to the host
Connecting must be made when power supply unit is not
plugged in the cable.
CAUTION
Flip the terminal. There is one port on the back for power and
communications (IDMI connector).
Connect the cable on the terminal.
Connect the other end to the power supply unit and a Host (PC /
cash register…).
Plug the power supply into the mains.
The main port at the back must not be used to connect
an HDMI video cable. Only connect cables provided by
Ingenico.
WARNING
Note :
2 screws can be added (M2.5 x 8) to hold more firmly the cable.
The terminal can be connected to the host by several ways, with optional
cables :
High speed USB device
High speed USB host
Ethernet
RS232
