User guide Link/2500 - Link/2500 I
Copyright© 2018 Ingenico
All rights reserved
16
Place the battery pack in its compartment. Close
the battery compartment trapdoor.
Battery compartment
4_5_3
Charging the battery
When does the battery need to be charged?
On initial start-up, charge the battery for 4 hours under the environmental
conditions stated above
When used with a terminal power supply : connect the power supply to
Link/2500 USB C connector.
How does the battery need to be charged?
The environment in which the charge takes place influences battery lifetime
and autonomy (number of transactions)
The optimal conditions are as follows :
Charging away from any external heat source (radiator, sun,
enclosed area…)
The optimal temperature is b15°C and +25°C
How can the battery be charged? Using the terminal power supply
Connect the terminal power supply unit to the terminal type C connector located
on the right side of the terminal.
Connect the power supply unit to the power supply mains network
Check to see if the battery symbol is flashing or moving(=battery charging)
