Press the yellow button, this will request an administrator password which is 123456,
and press Enter to Confirm, and enter the Administrator Menu
Using the up/down keys scroll down to WIFI Profile option. Press Enter to confirm.
Select Scan Networks and press Enter. The terminal will scan for available Networks.
Select the name of your network. If your router/Modem has a 2.4G and a 5G channel
select the 2.4G option.
Enter your WIFI password using the keypad. Confirm the password is correct and
press Enter to Continue.
The Wi-Fi indicator on the top of the screen will turn green
Press the Menu Button
Select option “Connection Test”
Terminal Will Print a receipt with “Connection OK” printed near the top.
Your terminal is now ready to use
Once the Base is connected, place the terminal in the charging base and allow the device
to power up. This will take approximately 2 minutes.
To connect the terminal to your Wi-Fi network, please follow these steps:
1.
2.
3.
4.
5.
6.
To confirm your terminal is connected and ready to accept Payments, perform a
connection test using the following steps:
1.
2.
3.
4.
Please consult your Quick reference guide provided for instructions on performing
transactions.
Support
EVOPayments.co.uk/support-centre/
Getting started
Connect the Power supply cable to the port shown and if Using Ethernet or PSTN, please
connect the cables to the Ports shown
