56
INGENIA IG4T
Cod. 420120235 REV. 1.2
The system types available when using the IG4T are 2:
In the “Stacked” configuration an IG4T speaker rests on a stand, or one or 2 speakers rest on a subwoofer (see
chapter
); in the “Flown” configuration, instead, one or two IG4T speakers are hanging.
After accessing the SYSTEM TYPE menu, then:
This menu allows to save and then recall the system usage configurations.
Even though at switch-off the IG4T retains all the information about the
latest settings, it may be useful to have at one’s disposal, for different
contexts, a previously saved batch of appropriate settings, and to be able
to quickly reload them. To this purpose, IG4T allows to save and rename 5
batches of settings, using the “SAVE” function, and to recall them using the
“RECALL” function. Should you later have to edit the settings stored in one
of the memory slots, you can later overwrite the previously saved slots.
• Stacked
• Flown
•
Select and confirm the desired mode, choosing between “Stacked” and “Flown”; select and confirm NEXT
to access the next screen (select and confirm BACK to return to the previous one). Now, if the system has
previously detected the presence of 2 speakers, it will switch to the
presence of a woofer has been selected in the previous
sub-menu, it will then switch to
the
menu; should that not be the case (Speakers 1, Subwoofer 0) the next screen will
be the initial one, and the procedure will end.
SYSTEM TYPE
ATTENTION!
•
Never install the speaker directly resting on the ground, but always use
the optional GSA-IG.
•
When “Stacked” on a tripode stand, the INGENIA IG4T cannot be
mounted in the configuration with 2 speakers stacked, but only in a
single speaker configuration, for safety reasons.
SAVE/LOAD SYSTEM MENU
Save/Load System Menu
