Loading, Transport and Storage
T-Rack
®
3.0 Series
– Assembly Instructions 1.1(2019-03) E inge
Page 27 of 84
© inge GmbH
4.3
Loading
Fork-Lift Truck Requirements
To lift and transport pallets in a longitudinal direction, only use fork-lift trucks or lift trucks with a
fork length of 180 cm or more.
The use of removable fork extensions or telescope extensions is permissible as long as a fork
length of at least 180 cm is ensured when transporting the pallet in the longitudinal direction.
Stackability
Note the instructions on the packaging:
Not stackable
Stackable max. 3 units high
All unmarked pallets may be stacked up to a height of 4 m, as long as this is permitted by the loading room
height.
Weight load
On the basis of the delivery scope, check the total weight with respect to the permissible weight
load of the truck.
Transport Protection
Ensure that the equipment is transported safely by securing it properly in the truck.
Load Distribution
When loading, fill the loading surface without gaps to prevent the transported equipment from
tipping, slipping, etc.
Low packages over which other, higher packages could tip in case of emergency braking must
not be positioned at the bulkhead.