Ingco RT22008, Руководство пользователя, Страница: 16 / 20

16|English
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
Replacing carbon brushes
Remove and check the carbon brushes regularly.
Keep the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time.Use only identical carbon brushes.
1. Brush holder cap
2. Knob
3. Screwdriver
Use a screwdriver to remove the brush holder caps. Take out
the worn carbon brushes, insert the new ones and secure
the brush holder caps.
NOTE:
When replacing carbon brush located on the same side
as the knob, remove the knob first before unscrewing the
brush holder cap.
CAUTION:
Be sure to re-install the knob after inserting new carbon
brush.
After replacing brushes, plug in the tool and break in brushes
by running tool with no load for about 10 minutes. Then
check the tool while running and electric brake operation
when releasing the switch trigger.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
INGCO Authorized Centers,always using INGCO replacement
parts.
1
2
3