Cars without ISOFIX (Install with Clips)
Hold the Installing Clips horizontally
facing upside.
Insert the Installing Clips into the
gap as shown while keeping its
face downward.
Push the Installing Clips horizon
-
tally all the way and then push
and stand the Clips vertically.
(※ If you cannot stand the Clips
vertically, push the Installing Clips
further downward.)
Place the Height Control Bar close
to
the vehicle seat and then fasten the
Belts.
(※ If the Height Control Bar is not
firmly contacted to the vehicle
seat, the Foot Plate may shake.)
After install the car seat on the
Installing Plate, adjust height of
the Foot Plate and the Load Leg for
the comfort level of your kid.
(※ Please refer to page7 for a
detailed
height adjustment method.)
Hang the ISOFIX Hooks from top
to bottom on the ISOFIX LATCH.
Cars with ISOFIX (Install with ISOFIX Hooks)
Installing Method
as close
as possible
6
as close
as possible
Insert your hand in the gap(seat
bight)between the cushion and
the back of the vehicle seat to
check if there isenough room for
the Installing Clips
(※ Safety first , make sure your
hand is safe.)
Place the Height Control Bar close
to
the vehicle seat and then fasten the
Belts.
(※ If the Height Control Bar is
not
firmly contacted to the vehicle
seat, the Foot Plate may shake.)
After install the car seat on the
Installing Plate, adjust height of
the Foot Plate and the Load Leg for
the comfort level of your kid.
(※ Please refer to page7 for a
detailed height adjustment method)
