Operating Instruction for VarioCAM® head
5 Starting Up
Operating Instructions
© InfraTec GmbH 2007
13
5.3.1
Description of the thermography system FireWire (IEEE 1394)
connection
Fig. 4 FireWire (IEEE 1394)
6-pole cable.
1. A connection from
thermography system to the PC
is made
with the 6-pole FireWire (IEEE 1394) cable (
Fig. 4
). In doing so,
the 6-pole FireWire (IEEE 1394) cable must be connected with
an IEEE 1394 PCI card integrated in the PC.
Fig. 5 FireWire (IEEE 1394)
4-pole cable.
A connection from
the thermography system to the notebook
is made with the 4-pole FireWire (IEEE 1394) cable (
Fig. 5
). In
doing so, the 4-pole FireWire (IEEE 1394) cable must be
connected with the IEEE 1394 FireWire connection integrated in
the notebook.
(alternatively PCMCIA CardBus card)
Fig. 6 LEMO 6-pole connector
2. There is a 6-pole LEMO connector (
Fig. 6
) at the other end of the
6-pole or 4-pole FireWire (IEEE 1394) cable.
Fig. 7 LEMO socket
(6-pole and 14-pole)
3. The 6-pole LEMO connector is connected to the 6-pole LEMO
socket (
Fig. 7
) on the thermography system.
Please ensure the connection is made to the correct LEMO
socket!
Note:
Plug the LEMO connector with the red dot at the top into
the socket. Do not apply excessive force.
5.3.2
Description of the thermography system power supply
Fig. 8 power supply
When operating the thermography system on a notebook
(FireWire connection without electricity supply), this must
be connected to the 6-pole LEMO socket (
Fig. 7
) via a
power supply (accessory).
Note:
If the thermography system is operated without a
power supply on a PC, it must be ensured that the
FireWire cards recommended by Infratec are used.
Otherwise Infratec makes no guarantee of functionality.
Fig. 9
Adapter P
for adaptation of the 6-
pole power supply cable to 14-pole
1. The power supply is connected with the
Adapter P
(
Fig. 9
) for using the 14-pole LEMO socket.
Please ensure you use the correct LEMO connector
(yellow marker)!
2. The 14-pole LEMO connector of the
Adapter P
(
Fig. 9
) is connected to the 14-pole LEMO socket
(
Fig. 7
) on the thermography system.
Please ensure you use the correct LEMO socket!
InfraTec
Содержание VarioCAM
Страница 2: ...I n f r a T e c ...
