Infrasonic QUARTET, Руководство пользователя

Страница: 14 / 28

14
5.2. Configuration section
• Sample Rate:
Select and see the current sample rate
of QUARTET. QUARTET supports 44.1, 48, 96, 176.4
and 192 kHz sample rates. Select “AUTO” to match the
sample rate of the source signal automatically. Selecting
“LOCK” allows you to set the sample rate manually.
• Word Ratio : You can choose between FS (standard
word clock) or 256FS (super word clock) settings.
• Clock Source
Internal:
Sets the internal clock of QUARTET.
External: Sets the S/PDIF input of QUARTET as master clock. This mode can only be
enabled, if the device connected to the S/PDIF input is configured as clock master.
Word Clock: Sets the Word Clock input of QUARTET as master clock. This mode can only
be selected when the device connected to the Word Clock input is configured as clock
master.
• Latency bar
Adjust the latency (also often referred to as buffer size) of QUARTET. A faster
latency is achieved by selecting smaller sample buffer size, which is ideal for
software synthesizer and timing sensitive recording. However, the latency is also
limited by your system performance. For recording, select a sample size between
64 ~ 512, and select 128 or 256 for Pentium 4 systems. Sample sizes of 48,
1024 and 2048 are used in special circumstances, of which 48 is reserved for
very fast ASIO working environments. The factory default setting is 128.
• Miscellaneous
On top:
Enables to display the QUARTET Control Panel always over other
windows. If this is not selected, the active windows of other applications will be
shown over QUARTET Control Panel.
About: Copyright notes.
Default: Resets the control panel to factory default settings.
• 3/4 Input Select
Analog:
Selects the analog input for input channels 3/4, while it disables the
digital S/PDIF input.
Digital: Selects the digital input for input channels 3/4, while it disables the
analog input 3/4.
• Stereo Mix
Stereo Mix feature is also called as “What you hear”.
ON: It simply creates new routing rules in Free Mixer and connects WDM
output channels to WDM inputs; hence it allows the recording of WDM output of
your soundcard. More about Free Mixer and its capabilities on the next page.