9
A N A LY Z E R D E S C R I P T I O N
Before attempting to operate the analyzer, review the analyzer features described below as well as all
warning labels. Identification and understanding of the physical features of the instrument will make
operation easier.
F R O N T P A N E L
Figure 1: Front Panel/Display
1.
Span –
Calibrates the analyzer to the current gas concentration. This should be
performed while calibration gas is flowing through the analyzer.
2.
Zero –
Zeros the analyzer. This should be performed while zero gas is
flowing through the analyzer.
3.
Menu –
Leads to setting the Configuration options.
4.
On/Off –
Turns power on and off.
5.
Flow Meter and Control–
Regulates flow to the sample cell and shows
measured flow in SCFH or LPM.
