17
O P T I O N S
S O L E N O I D C O N T R O L
When installed, the Zero Solenoid is enabled
and will open the Zero Port automatically when
the analyzer is Zeroed. The solenoid can be
disabled manually by selecting NO at this
screen. The analyzer returns to the Home
Screen after the selection is made.
A L A R M S E T T I N G S
If the unit was purchased with the optional
Alarms, there will be an Alarm output panel on
the rear of the analyzer. For each gas measured
configure the low and/or high alarms by
pressing the value in the box to set it. If your
unit does not have Alarm outputs, skip this step
by pressing Exit.
Use – and + in increment/decrement to set
currently selected digit. Then use the <- and ->
to move to the next digit to be edited. When
you have finished editing, press the DONE
button to complete this step.
P U M P C O N T R O L
When a pump is installed the pump is
controlled by this menu option. In addition the
unit also has an external switch on the rear
panel. When selecting ON via the menu set the
rear switch to ON.
Pump Control
On
Off
