background image

FMX HT-640 P-SERIES USER MANUAL

8

3.

Safety Information

• 

This device must be installed by qualified service personnel or system 

installation personnel. 

• 

Operation is subject to the following two conditions: (1) This device may 

not  cause  harmful  interference,  and  (2)  this  device  must  accept  any 

interference received, including interference that may cause undesired 

operation. 

• 

To prevent eye damage and personal injury, do not look into the laser. Do 

not point the laser directly at people or animals or indirectly off reflective 

surfaces. 

• 

Do not disassemble or modify the device. 

• 

Do not point the imager (with or without the lens cover) at intensive energy 

sources, e.g. devices that emit laser radiation, or the sun. This can affect 

the accuracy of the camera, and cause damage to the detector. 

• 

Do not use the imager in an ambient temperature outside of the operation 

range. High/low temperatures can cause damage to the device.

• 

Prior to start of the device, make sure that the power supply is properly 

connected. If the power supply is connected incorrectly, the device may 

be damaged.

• 

Do not place any objects on the power cord, and do not place the device 

where the power cord can be easily touched.

• 

Do not get water or salt water on the device or permit the device to get 

wet. Damage to the device may occur.

• 

Remove any water or moisture on the device before you install it. Damage 

to the device may occur.

• 

Clean the case with a damp cloth and a weak soap solution. Do not use 

abrasives, isopropyl alcohol, or solvents to clean the case or lens/screen. 

• 

Be careful when cleaning the lens. Do not clean the lens too vigorously. 

This can damage the surface. 

• 

Avoid condensation. Taking the imager from cold to hot will cause 

condensation in imager. To protect the imager, power on the device and 

wait until it becomes warm enough for the condensation to evaporate. 

• 

Keep device out of reach of children.

• 

Storage: If you do not use the imager for a long period of time, put the 

device in a cool and dry environment. Store the device in an ambient 

temperature of -40 °C to 70 °C (-40 °F to 158 °F).

• 

This product is a precise electronic device that must be handled with care 

during use, storage, and transportation to prevent dangerous actions such 

as the device being hit by external force, or falling from heights.

• 

During transportation and storage the original packaging box must be used.

• 

Do not drop or throw the device.

Содержание FMX HT-640























Отзывы: