Infra4Health SH1, Руководство пользователя

Страница: 12 / 22

10
temperature (setting temperature should be higher than the environment/
indoor temperature) and time, press again the POWER button and
heaters are on. During the session time, when the temperature reaches
the setting level on the control panel, all the heaters will be working at
30% power.
b. button is to control the on/off of the floor heater.
5. Auto function
“AUTO” button is for pre-setting the time you want your sauna to
turn on. Press “AUTO” button once, then pre-set the HOUR by pressing the
buttons of TEMPE/-; and pre-set the MINUTE by pressing the
buttons of TIME+/-. When the pre-set timing is 0, the sauna starts to work.
6. Lighting
1
RGB button is for LED lighting strip. Color alteration can be
pressing this button.
2
LIGHT button is to control the on/off of the inside reading light.
3
Color therapy light can be controled by the remote control(on/off,color
changed.).
7. Multimedia
Even though the sauna is turn on, the multimedia is preset off. The
DISPLAY of Multi-media will be off too. When the multi-media is on, the
DISPLAY will show the status of chosen media.
1
Press the MULTIMEDIA button (on/off) , the preset FM (Radio) is
on. The DISPLAY will show radio frequency.
2
MODE button : it enables to change to different media. It could
switch between LINE (incl. AUX, USB, SD card) → BLUE (blue-tooth)
→ FM (radio).
3
PLAY/PAUSE button : when the media is in the status of LINE or
BLUE, media will be played/paused by simply pressing; when it is FM,
press against the button for ≥ 5 seconds, the radio will search and
storage the channels it just searches.
4
VOL+ button : press against for ≥ 3 seconds, the volume increases.
Under the status of LINE/BLUE, shortly press this button to get into
next song. Under the status of FM, shortly press this button to get into