Connecting the Machine
13
1
Connecting the Machine to the Host Using the Parallel Cable
Connect the machine to the host computer using a parallel cable compliant with
IEEE 1284 (supplied by you).
Follow the procedure below to connect the machine to the host computer.
Important
❒
Before connecting an interface cable between the machine and a computer,
make sure that the machine is not operating, and then turn off the main power
switch of the machine and computer.
❒
Be sure to use the designated interface cable. Using another cable may cause
radio interference.
AAAA
Turn off the main power switch.
Important
❒
Before turning off the main power switch, see “Turning Off the Power”,
General Settings Guide
.
BBBB
Plug the 36-pin end of the parallel cable into the parallel port at the right
side of the back cover of the machine.
CCCC
Squeeze the wire clips on each side of the connector together until they
snap into place. The clips hold the cable securely in place.
DDDD
Plug the other end of the parallel cable into the computer's parallel port.
ZGPH090E
Содержание ISC1032
Страница 4: ...ii ...
Страница 24: ...Getting Started 20 1 ...
Страница 57: ...53 MEMO ...
Страница 58: ...Printer Scanner Kit Type 1232 Operating Instructions Printer Reference 1 Printed in Japan UE USA B463 8607A ...