Launch Guide
IS2216 / IS2220 / IS2220D
33
Printer
Feature
Specification
CPU
TMPR4955B-300 240MHz
RAM
Std.
192MB (Resident 64MB + 128MB additional memory)
Note: Additional 128MB Memory is pre-installed in the
Printer/Scanner Unit
Hard Disk
Not available
Std.
PCL5e, PCL6, RPCS
PDL
Option
Adobe PostScript3
Continuous
Print Speed
Max
16ppm / 20ppm (IS 2216 / 2220) A4/LT:LEF 600dpi
Engine
600x600 (dpi)
PCL5e
300x300 (dpi)/ 600x600 (dpi)
PCL6
600x600 (dpi)
RPCS
600x600 (dpi)
Controller
PS3 (Option)
300x300 (dpi)/ 600x600 (dpi)
PCL5e
300x300 (dpi)/ 600x600 (dpi)
PCL6
600x600 (dpi)
RPCS
300x300 (dpi)/ 600x600 (dpi)
Print
Resolution
Drivers
PS3 (Option)
600x600 (dpi)
Std.
PCL: 46 fonts (TrueType: 10 fonts, Intellifont: 35 fonts, 1
bitmap font)
Fonts
Option
PS3: 136 Adobe Type 1 fonts
Std.
RJ-45 network port (100BASE-TX/10BASE-T), USB2.0
Host
Interface
Option
Wireless LAN Interface (IEEE802.11b)
IEEE1394 x 2 port (6 pin)
Parallel Port IEEE1284
Bluetooth
Note: Only one of above option can be installed.
Network Protocol
TCP/IP, IPX/SPX, NetBEUI
(*1)
, AppleTalk (Auto Switching)
Standard MIB
MIB-II (RFC1213), Host Resource (RFC1514),
Printer Mib (RFC1759)
MIB
support
Private MIB
Ricoh Original
Connectivity
Network/Operating
Systems
Unix:
Sun Solaris 2.6 / 7 / 8 / 9
HP-UX 10.X / 11x
SCO Open Server 5.0.6
Red Hat Linux6.x / 7.x / 8.x
IBM AIX V4.3/5L V5.1
Mac OS 8.6 - 9.2.X (OS X Classic)
Mac OS 10.1 or Later
Note *1: Smart Device Monitor for client is required for Net BEUI.