INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - [email protected] – 02 06 08 205 05
3
User’s instructions
The
PFS 7 TVFR
was designed to give the highest degree of protection against overloads, voltage peaks,
electromagnetic interference (EMI) and radio frequency interference (RFI). It protects your computers and
peripherals against damages caused by accidental overvoltages, voltage peaks, lightning, network
parasites and overloads. A resettle circuit breaker provides protection against overloads and short circuits.
Insurance terms and conditions
See terms and conditions, and register within 10 days after purchase on the web site:
www.infosec.fr
Security
Please read all these instructions before installing the
PFS 7 TVFR
. It must be installed only inside a
protected location in which temperature and humidity do not exceed the limits defined in the technical
specifications section.
Please refer to local norms to check if a complementary primary surge protection is necessary in addition
to this type 3 surge protector.
Installation
Plug the
PFS 7 TVFR
into a two-pole connector with earth (2P+E-10A).
Put the switch into the “I” or “ON” position and check that the “Protected” and “Power OK” lights are
on. If it does not light on, check the electrical power supply. If the orange “Protected” light is off, do
not use the
PFS 7 TVFR
.
Then, plug your equipment to be protected into the 7 protected outlets of the
PFS 7 TVFR
.
1. On/Off switch
The mains 2-pole switch of the
PFS 7 TVFR
is used to switch the 7 outlets on and off.
2. Overload protection
When the consumption of connected equipment exceeds the authorized value, the circuit breaker opens to
protect the
PFS 7 TVFR
. To put it back into service, reduce the connected power and reset the circuit
breaker.
3. “Power OK”
Green led “Power OK” turns on: power is effective.
Green led “Power OK” is off: power is not effective.
4. Active surge protection led
Orange led “Protected” turns on: the protection is effective.
Orange led “Protected” is off: the protection is not effective.
5. Protected outlets
Outlets are used to connect equipment such as a PC, printer, monitor, scanner, modem, external CD Rom
drive, home DVD player.
6. Space-wide protected outlets
PFS 7 TVFR
benefits from 2 space-wide outlets for easy use with transformer blocks.
7. Coaxial arial TV antenna protection
The
PFS 7 TVFR
is equipped with protection against overvoltages
for your TV antenna connection thanks
to its 2 aerial type coaxial connectors. Connect the line input to the “IN” connector and use the cable
supplied to connect the “OUT” connector.
In case of problem, do not disassemble the
PFS 7 TVFR,
there are no reparable parts inside it.
Please, call the Hot Line.
