INFOSEC P2 SunRise 2000, Руководство пользователя

Страница: 28 / 60

INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 04 10 AA 68 203 18
28
Er09
Inverter output over-
current.
Over-current on the AC
side. This fault code is
displayed if the current in
the AC network is larger
than specified.
Er11 Inverter over-load.
Overload on the AC side.
This fault code is displayed
if the load in the AC
network is larger than
specified.
Er13
Inverter short-
circuits. Short-circuit on the AC
side.
Er14 Inverter PLL fails.
The phase of Inverter can’t
synchronize with the utility.
Er29
Inverter output DC
current over spec.
The DC component of the
electricity fed into the grid
is longer than permissible
range.
1. Turn off AC
breaker, then check
the peripheral AC
system configuration
and the grid
conditions.
2. If error code
keeps recurring,
contact your local
distributor for help.
Er10
Inverter over
temperature. The internal temperature is
too high.
Er18
Heat sink over
temperature. The hest sink temperature
is too high.
1. Try to reduce the
ambient
temperature.
2. Move the inverter
to cooler place.
3. If error code
keeps recurring,
contact your local
distributor for help.
Table 2. Grid fault alarm code and alarm Code Description
LCD
indicate
Designation Description Repair
AL00
Utility voltage
over-voltage.
AL01
Utility voltage
under-voltage.
Utility voltage greater
or smaller than the
permissible value.
AL02
Utility voltage
over-frequency.
AL03
Utility voltage
under-
frequency.
Utility frequency
greater or smaller
than the permissible
value.
1. Wait for 1 minute, if the grid
returns to normal, the inverter
automatically restarts.
2. Check grid connection, such
as wires and connectors.
3. Make sure grid voltage and
frequency meet the proper
specifications.
4. If error code keeps
recurring, contact your local
distributor for help.