Infortrend EonStor GSe Pro 200, Руководство по оборудованию

Страница: 42 / 51

4-4 Chapter 4: System maintenance
4.1.2 Replacing the host board
Before replacing the host board, you must take note that the firmware automatically restores the system
to its factory settings when adding or replacing a host board.
To replace the host board:
1. Shut down your system. Wait for a minute for the remaining electric current to dissipate.
2. Loosen the thumb screw of the host board.
3. Pull out the host board to remove from the system.