Infortrend EonStor DS S12S-J2000-G, Руководство по оборудованию

Страница: 109 / 216

EonStor / EonStor DS S12/S16/S24 Series
130
Configu
BOD
enclosures:

Fault-tolerant links in a dual-controller combinatio to SAS
ch disk
ander,

With data paths through separate SAS domains, access to disk drives can
ration Rules
Following are the rules for connecting SAS interfaces across RAID and J
ns: Corresponding
ical links are available from ea
ard, each through a SAS exp
xternal SAS port.
drives’
dual-ported
interface, two phys
drive, routed across the backplane bo
and then interfaced through a 4x wide e
be continued in the event of a cable link or SAS JBOD controller failure.
Designation Description Designation Description
1
RAID controller A
5
Dual-ported SAS drives
2
RAID controller B
6
Expander
3
JBOD controller A
7
To another JBOD
4
JBOD controller B

Fault-tolerant Links to SAS disk Drives
many
a longer SAS external cable (e.g., a 120cm cable)
may be necessary for connecting a JBOD from the opposite direction

SAS expansion cables will be available with the JBODs. Note that if
JBODs are connected,
109