Infortrend DS 3012U Скачать руководство пользователя

Страница: 74 / 100

3-2

Chapter 3: System monitoring

3.1.1 LEDs

This section details the system LEDs and their descriptions.

Front panel LEDs

•

Panel LEDs

Number

LED name

Color

Description

Power

(PWR)

The system is ON and the system status is normal.

OFF

The system is OFF or the system has failed.

Busy

(BUSY)

There is an active traffic on the host/drive channels.

OFF

There is no activity on the host/drive channels.

Attention

(ATTN)

A component failure/status event occurred.

OFF

The system and all its components are in normal operation

status.

NOTE: The ATTN LED lights up during the bootup process. Once the system successfully boots up,

this LED will turn off.

•

Drive tray LEDs

Number

LED name

Color

Description

Drive Busy

Data is being written or read from the drive. The drive is

busy.

The hard drive is plugged in but there is no activity going

on.

Power

status

The drive bay is occupied and working normally.
Disk drive failed or connection problem occurred.

2.5-inch drive tray

3.5-inch drive tray

Содержание DS 3012U





































































































Результаты поиска

Содержание DS 3012U

Отзывы:

Похожие инструкции для DS 3012U

Бренды по названию

Популярные бренды

Infortrend DS 3012U, Руководство по оборудованию

Результаты поиска

Содержание DS 3012U

Отзывы:

Похожие инструкции для DS 3012U

Бренды по названию

Популярные бренды