inform Infocharger, Руководство пользователя

Страница: 5 / 21

INFOCHARGER 1
1 Safety
For the staff and equipment safety, it is necessary for the users to fully read and
understand this manual for DC Power Supply/Battery Charger before installation and
operation.
•
Avoid the sudden temperature changes, which can cause condensation inside the
battery charger. Otherwise, wait at least for two hours before switching on.
•
This product should be installed according to the instructions defined at chapter
3.3 ‘Positioning’.
•
Do not close ventilation holes or other openings.
•
Keep away the liquid and solid object entry inside the unit.
•
Installation and commissioning have to be done by authorized technical service.
•
Earth ( Ground ) connection should be done.
•
Do not plug in/off the communication interface cables during bad weather
conditions with lightning.
•
To avoid the risk of fire, all the connections have to be done according to the
suggested cable cross-sections. The cables should be isolated type and properly
installed.
•
Do not connect exceeding load than charger’s nominal power to the output.
•
Maintenance and service of the equipment should be done by authorized
technical service staff.
•
In case of emergency (damage of the cabinet, front panel or connections etc.)
switch off the battery charger, disconnect the input supply and inform the
authorized technical service staff.
•
The unit should be packed properly if it is needed to be moved.