Infolock INSIGHT DLP SENSOR 0610S, Руководство по установке оборудования

Страница: 6 / 14

6 INSIGHT DLP SENSOR 0610S Appliance Hardware Installation Guide www.infolocktech.com
4B. 4-POST RACK INSTALLATION WITH QUICK MOUNT RAILS
(square hole rack only)
Rear section of
the adjustable
rack rail assembly
Rack bracket tab
Rack bracket tabs
Front section of
the adjustable
rack rail assembly
Step 1
Locate the two adjustable standard rack rail assemblies.
n
Insert the tabs on the front section of the adjustable
rack rail assembly through the openings in the rear
sections of the assemblies.
n
Check to make sure the adjustable rack rail assemblies
are connected correctly, then slide the front section
forward and the rear section back to keep them
from coming apart. These assemblies adjust
to accommodate different rack depths.
Qu ic k- mo u n t
l oc k in g
mechanism
A dj u s t ab l e qu ic k- mo u n t
rac k rai l assemb l ies
E m pt y
ho l e
E m pt y ho l e
Qu ic k- mo u n t
rai l t abs
( an gl e v ie w)
Quick-mount
rail tabs
(side view)
Qu ic k- mo u n t rai l
l oc k in g mechanism
4-p os t
rac k
D
C
E
A
B
Step 2
n Quick-mount rail Installation in the square hole rack:
A.
Insert the quick-mount rail tabs on the
front of the rack rail assembly through
the selected set of square holes in the rack.
B.
Push the tabs into the holes in the rack
until you hear the locking mechanism
on the rail assembly click into place.
The locking mechanism secures the rails
to the rack.
C.
Slide the rail assembly to the back of
the rack.
D.
In the rear, insert the quick-mount rail tabs
through the square holes level with the front
installation.
E. Push the tabs into the holes until you hear
the rear locking mechanism click into place.
n
Repeat these steps for the other side of the rack.
*
NOTE:
Make sure the quick-mount rail assemblies are aligned
in the rack not only in the front and back, but are level in
height on the left and right sides for proper alignment for
appliance installation.
NOTE:
There is a threaded hole between the two
quick-mount tabs in the rail assembly. This hole will
be used to secure the appliance in the rack later in
this guide.
*