Lamp Module Replacement Instructions:
SP-LAMP-073
6. Loosen the two (2) captive screws that attach the
lamp module to the projector. Carefully remove the
lamp module, using the handles and pull out.
Dispose of the lamp in an environmentally
proper manner.
7. Reverse steps 1 – 6 to install the new lamp module.
While installing, align the lamp module with the
connector and ensure it is level to avoid damage.
Note:
The lamp module must sit securely in place
and the lamp connector must be connected properly
before tightening the screws.
8. Plug in the power cord and press the
Power
button
to turn on the projector.
9. To reset the lamp hour timer:
a.
IN5312/IN5314:
Navigate to the
Installation II
>> Advanced
menu using the projector keypad
or remote and select
Lamp Hour Reset
. Press
the left and right arrow buttons to adjust the
settings.
b.
IN5316HD/IN5318
: Navigate to the
Setup >>
Advanced >> Lamp
menu using the projector
keypad or remote and select
Reset
Lamp
Timer
. Press the left and right arrow buttons to
adjust the settings.
5012083101
*5012083101*
Lamp Mode
Reset Lamp Timer
Lamp Hour
Boost
59 Hr
Lamp
