Product Note
009-0403-00
This adapter allows you to connect your InFocus projector to a computer via a
null modem cable. You can then control the projector from the computer by using
the command line interface commands.
This package contains the adapter (part number 590-0284-00), two threaded
standoffs (206-0010-00), and this Product Note (009-0403-00).
Connecting the Adapter
To securely attach the RS-232 adapter to your projector, you must first remove two
screws on the projector’s CableWizard connector, insert two threaded standoffs,
then insert the adapter and tighten the thumbscrews.
1
Using a small Phillips screwdriver, remove the 2 screws on the projector’s
CableWizard connector (see figure below).
The connector is labeled with this icon:
. Removing these screws pro-
vides space for the 2 standoffs included with the adapter.
2
Screw the 2 threaded standoffs into the holes.
3
Plug the adapter into the CableWizard connector.
4
Securely fasten the adapter to the projector with the thumbscrews.
5
Plug your null modem cable into the adapter and into your computer.
Product:
RS-232 Adapter (SP-CWRS232)
remove these 2 screws
adapter
CableWizard connector
and replace with standoffs
null modem cable
