F
IGURE
3
Wall Mount Installation
Complete the following steps to install the projector mount and projector
to your wall. (
F
IGURE
4
)
Note
: Look at the bottom of the swivel bracket (
G
) and locate the arrow.
Make sure you install the projector mount with the arrow pointing toward
your screen.
15. Use the Allen wrench to remove the upper plate (
E
) from the swivel
bracket (
G
).
16. Use the Allen wrench to remove the two screws from the enclosed
end of the of the suspension adapter (
N
), and place it (
N
) into the
slotted extension on the upper plate (
E
). Make sure that the two (2)
outer holes on the suspension adapter (
N
) align with the holes on
the slotted extension on the upper plate (
E
).
17. Screw the two screws removed in step 2 into the two (2) holes to
secure the suspension adapter (
N
) to the upper plate (
E
).
18. Attach the swivel bracket (
G
) to the suspension adapter (
N
) and
secure them with two screws removed in step 1.
19. Secure the upper plate (
E
) to the wall (
M
) using the commercially
available hardware (
F
) suitable for your environment. Be sure that
the swivel bracket (
G
) arrow is pointing toward your screen.
20. Carefully raise the projector (
C
) with the mounting bracket (
B
)
attached and insert it into the bottom of the swivel bracket (
G
) by its
tabs.
21. Rotate the projector (
C
) with the mounting bracket (
B
) attached
180º
so that the projector’s focus rings is pointing toward your
screen.
22. Align the safety screw (
H
) on the swivel bracket (
G
) with the end of
the arrow -shaped slot on the mounting bracket (
B
) and screw it
through the opening to prevent further rotation. Hand-tighten the
screw (
H
).
23. Hand-tighten the remaining two clamp screws (
J
) to secure the
mounting bracket (
B
) to the swivel bracket (
G
).
Check all of the hardware for proper tightness and security.
Do not over-
tighten the screws
.
F
IGURE
4
