11
Shutting down the projector
Power Save
./ 2 / / '' /'+
!!/ !' #! 0 0' (
00!' /#!/ 2 0
#! 01 / 2 0/ '# 0! 0
H' /
Power
10!'# ,' /
0
Turning off the projector
./ 2 /
Power
1 ./ !'0/
*&31!# 1 ' /! /
!/ !' / / !'/! 0/ *&3!#/# 0/
%!#/ 1! '! ! / 2
Troubleshooting your setup
'# !/ / :
E# ($G 0 1! //
./ *&3/ 2 D 00 / / 2
0/ !1! /
./ !!#1! /' !1! ' ' '
/ 1! !0 0 ./ !/ 0 /
0 / / 1! '! 0/ 00!
!
Table 2: LED behavior and meaning
LED color/behavior
Meaning
solid green
The projector is plugged in, or the projec-
tor has been turned on and the software
has initialized. The projector has been
turned off and the fans have stopped.
blinking green
The
Power
button has been pressed and
the software is initializing, or the projec-
tor is powering down and the fans are
running to cool the lamp.
blinking red
The projector will not start up if the LED
is blinking red. You must correct the prob-
lem, disconnect and reconnect the power
cable, then power on the projector.
See page 34 for more information on
blinking red LEDs.
A fan (blinks 4 times) or lamp (blinks 3
times) failure has occurred. Turn off the
projector and wait one minute, then turn
the projector on again. Also check for a
blocked vent or a stopped fan (blinks 5
times).
solid red
An unidentifiable error: please contact
Technical Support.
