InFocus LP740B, Руководство пользователя, Страница: 19 / 63

8
S e t t i n g u p t h e P r o j e c t o r
Connecting a Video Player
1
If your video player uses a round, one-prong composite video
connector, you’ll need the audio and video cables.
•
If your video player uses a round, four-prong S-video con-
nector, you’ll need the S-video cable and the audio cable.
2
Plug the video cable’s yellow connector into the “video-out”
port on your video player (Figure 8). This port may be labeled
“To Monitor.”
•
If you’re using an S-video cable, connect it to the “S-video
out” connector on the video player.
3
Plug the other yellow connector into the composite Video In
connector on the back of the projector.
CAUTION: Your video player
may also have a “Video Out” port
for a coaxial cable connection.
DO NOT use this to connect to the
projector.
•
If you’re using S-video, plug the other end of the cable into
the “S-video” Video In connector on the projector.
F
IGURE
8
Connecting the projector to a video player
4
Plug the audio cable’s white connector into the left “audio
out” port on your video player. Plug the cable’s red connector
into the right “audio out” port on the video player.
5
Plug the other end of the cable into the left and right Audio In
ports on the projector.
The projector is compatible with these major broadcast video
standards: NTSC, NTSC 4.43, PAL and SECAM. It automatically
adjusts to optimize its performance for the incoming video.
S-video
composite video/audio