background image

1

INTRODUCTION

The In Focus Systems LitePro

®

 610 and 620 multimedia projec-

tors combine powerful and sophisticated features with easy-to-
use, intuitive controls. Built-in multimedia features include high-
fidelity stereo audio by JBL™, a palette of 16.7 million colors and 
Digital Light Processing™ (DLP) technology. The 600 series pro-
jectors are ideal for high-performance business, training and 
imaging applications that demand exceptional color quality. The 
610 has VGA graphics, the 620 has SVGA graphics. The user 
interfaces of the two products are identical; information in this 
User’s Guide applies to both products.

Image Resolution

LitePro 610

The VGA resolution of the projected image of the 610 is 640x480. 
The projector displays computer images that are 640x480 or 
lower just as they appear on your computer’s monitor. Screen 
resolutions between 640x480 and 800x600 are compressed to 
640x480. The projector cannot compress screen resolutions above 
800x600. If your computer’s screen resolution is higher than 
800x600, reset it to a lower resolution before you connect the pro-
jector.

LitePro 620

NOTE: The 620 automatically 

expands 640x480 images to 

800x600. You can display these 

images at 640x480 by turning off 

the Auto Resize feature. See “Auto 

Resize” on page 37 for more 

information.

The SVGA resolution of the projected image of the 620 is 800x600. 
The projector displays computer images that are 800x600 or 
lower just as they appear on your computer’s monitor. Screen 
resolutions between 800x600 and 1024x768 are compressed to 
800x600. The projector cannot compress screen resolutions above 
1024x768. If your computer’s screen resolution is higher than 
1024x768, reset it to a lower resolution before you connect the 
projector.

Downloaded from ProjectorsManual.com Manuals

Содержание LitePro 610




































































Отзывы: