manualshive.com logo in svg

InFocus LitePro 580, Руководство пользователя, Страница: 59 / 72

Поделиться
Скачать
InFocus LitePro 580 Скачать руководство пользователя страница 59

Troubleshooting

56

LitePro 580 User’s Guide

Common problems and solutions

Problem: Projector doesn’t turn on

• Make sure power cord is plugged in firmly.

• Make sure projector is plugged in a live AC outlet or power 

strip.

• Check to see that the projector is not too hot to operate and 

that the temperature monitor light is not orange.

• If the projector lamp was replaced, make sure the new one is 

fitted correctly and the lamp door is properly fastened.

• Check the fuse to see if it has blown.

Problem: Nothing on screen

• Make sure you have removed the lens cover.

• Verify that computer or video cables are connected to the 

correct ports on the projector and the computer or video 
equipment. 

• Press the Standby button. This toggles the lamp on and off.

• Make sure no cable connector has a bent pin.

• Make sure the lamp is not too hot to operate. It will not light if 

it is.

Problem: Picture is blurred or only part of image is in focus

• Focus the lens.

• Make sure the projector is not too close or too far from the 

screen.

• Make sure the projector is at a right angle to the screen.

• Adjust  Sync.

• Adjust Brightness.

• Adjust Tracking.

Problem: Image is not centered on the screen

• Adjust the Horizontal and Vertical settings on the Display 

menu.

Downloaded From projector-manual.com Boxlight Manuals

Содержание LitePro 580









































































Отзывы:

Нет отзывов