47
4
Loosen the captive screws that attach the lamp housing to the projector.
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
5
Install the new lamp module and tighten the screws.
6
Replace the lamp door by sliding it into place.
7
Plug in the power cord and press the
Power
button to turn the projector
back on.
8
To reset the lamp hour timer, navigate to the
Status and Service
menu and
select
Reset Lamp Hours
(on page 37).
Using the security lock
The projector has a security lock for use with a Cable Lock System. Refer to
the information that came with the lock for instructions on how to use it.
loosen screw
security lock