IN3144_IN3146_IN3148HD User’s Manual
—
34
—
Advanced 1 Features
Press the
Menu
button to open the
OSD
menu. Press the
◄► buttons to move to the
Settings 2
menu. Press the
▲▼ buttons to move to the
Advanced 1
menu and then press
(Enter)
or ►.
Press the
▲▼ buttons to move up and down in the
Advanced 1
menu. Press the
◄► buttons to
enter and change setting values.
I
TEM
D
ESCRIPTION
Menu Position
Press the
◄► buttons to enter and select different OSD location.
Translucent Menu
Press the
◄► buttons to enter and select OSD background translucent level.
Low Power Mode
Press the
◄► buttons to enter and turn Low Power Mode Off, Low Power, Network.
Fan Speed
Press the ◄► buttons to enter and toggle between Normal and High fan speeds.
Note
: We recommend selecting high speed in high temperatures, high humidity, or
high altitude (higher than 1500m/4921ft) areas.
Lamp Hour Reset
After replacing the lamp, the lamp should be reset. See page
35
for more information
on
Lamp Hour Reset
.
Projector ID
Press the
◄► buttons to enter and adjust the two digit projector ID from 00 through
98.
Network
Press
(Enter) or
► to enter the Network menu. See page
35
for more information
on
Network
.
Note:
When "Network" is enabled, VGA Out is inactive when the projector is in standby mode.
Both VGA OUT and Network control are active in standby when Low Power Mode is set to Off.
Содержание IN3144
Страница 1: ......