InFocus IN1100 Series Скачать руководство пользователя страница 7

If the power light is off, make sure the power cord is connected and plugged into a live 
electrical outlet. If the power light is amber and not blinking, touch the power light (or 
press power on the remote).
Check video source and cables. Make sure the video source (computer, DVD player, 
VCR, etc.) is turned on and cables are securely connected between the source and the 
projector. 
Press the Source button. You may need to press it several times to view the correct 
source.
Press the Auto Image button.

T R O U B L E S H O O T I N G

Warning:

 In the unlikely event of a lamp rupture, particles may be ejected from 

the projector. Keep out of the area under and around the projector while the 
projector is in use. See the safety instructions booklet for more details. 

More troubleshooting options are in the Reference Guide

Download it at www.infocus.com/support

If there is no picture or the picture is blank

If "Signal out of range" is shown, or the picture looks bad

Turn the projector off and wait at least one minute, then turn it on again. If the Service 
Required light turns on again, the projector needs to be serviced. See below for 
service contact information. 

Press the Auto Image button. If that doesn't help (and the source is a computer), 
reduce your computer's display resolution or vertical refresh rate.

If the replace lamp light is on

If the high temperature light is on

If the service required light is on

Turn the projector off and wait at least one minute, then turn it on again. If the Replace 
Lamp light turns on again, the lamp needs to be replaced. For lamp replacement 
instructions, see the Reference Guide, which can be downloaded at

www.infocus.com/support

Only InFocus genuine lamps are tested for use in this projector.

Turn the projector off and remove anything that may be blocking the air vents on its 
side. Leave the projector off for at least one minute to let it cool before turning it on 
again.

Important:

 Continuous operation at high temperature may reduce the lifetime of the 

lamp and/or projector. 

Содержание IN1100 Series









Отзывы: