3x1 Wallplate Transmitter Switcher Kit
INFOBIT AV
www.infobitav.com
hold it at least 3 seconds to enable auto-switching mode. For more details, please
refer to the
⑪
DISPLAY ON/OFF:
Press the button to turn on/off the display. For more details,
3.2
Switcher Rear Panel
①
FIRMWARE:
Micro-USB port for firmware upgrade.
②
DC IN:
Connects to 24V power supply.
③
RS232:
Connects to a control device (such as PC) to send RS232 command to
control this switcher by RS232, or control the far-end third-party device. For more
details, please refer to the
6. RS232 Control
.
④
IR IN:
Connects to IR receiver to control far-end display device by IR pass-through.
⑤
IR OUT:
Connects to IR emitter to control local source device by IR pass-through.
⑥
HDBT OUT (PoC):
Connects to the
HDBT IN
port of the receiver by a CATx cable.
It supports 24V PoC to enable the switcher can be powered from receiver.
HDBT OUT
PoC
1
2
3
4
5
6
