INFOBIT AV
www.infobitav.com
Second Way
：
Connect 220V AC power supply and interface box with 12V DC power adapter.
After 220V AC power is powered on, check the power indicator light on the panel; After about 3
seconds, the device screen displays the device's IP address.
Note: 12V DC power supply and PoE power supply cannot be used simultaneously.
2) In the Dante audio network, the Dante Controller software is required to route the signals
that connect to the network. It implements one-to-one, one-to-many mapping of inputs to
outputs within the Dante network.
Note: the Dante Controller software is available on Windows 7, Windows 10, Mac OS, and OS
X10. Please select the appropriate version according to your system platform.
3) Use
Sound Tune
software (built-in processor) to adjust the parameters of audio signals.
After the device is connected to the local area network, open the PC software and click the
"Search Device" button in the lower left corner. The IP address of the same type of device
online will be displayed. Device default Dante dynamic IP; Username:
admin
; Password:
123456
①
Status indicator. If the green light is on, the signal is normal. Red light signals are abnormal.
②
Phantom power switch button, phantom voltage is 48V.
③
Mute button, channel mute switch
④
Analog gain adjustment gear, 8 total, including: 0,1,2,3,4,5,6,7
⑤
Search for the IP address of the currently online device and display it. Right click to select IP
to modify.
⑥
The driver adjusts the digital gain of the current channel.
输入
参考均衡
压缩器
回声消除
混音器
图示均衡
限幅器
输出
连接
设置
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
In A
In B
48V
MUTE
48V
MUTE
48V
MUTE
48V
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
Dbox 66-H
192.168.1.200
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
