7. EDID Settings
User can select following EDID modes via RS-232 command or OSD menu
navigation.
6 / 15
No. EDID Mode
1
3
4
5
4K60-2.0CH
4K30-2.0CH
4K30-5.1CH
1080P-2.0CH
2
4K60-5.1CH
7
8
9
1080P-7.1CH
6
1080P-5.1CH
No. EDID Mode
10
12
13
14
1920x1200-2.0CH
1600x1200-2.0CH
1440x900-2.0CH
1360x768-2.0CH
11
1680x1050-2.0CH
16
17
18
1024x768-2.0CH
720P-2.0CH
AUTO
15
1280x1024-2.0CH
4K30-7.1CH
4K60-7.1CH
③
MENU, EXIT, LEFT, RIGHT, UP, DOWN, OK:
OSD Menu navigation buttons.
④
A-IN:
Press this button to pop up the audio channel selection OSD, then press
the UP / DOWN button to select the audio output channel. (The output audio
follows the video source by default.)
Mute:
Press this button to mute / unmute the audio.
VOL-, VOL+:
Press these buttons to increase / decrease the audio output
volume.
: Multiview display mode switching button.
▪
Short press this button to circularly select
:
SINGLE - PIP - PBP (1) -
PBP (2) - Triple (1) - Triple (2) - Quad (1) - Quad (2).
▪
Long press this button for 3 seconds to select the aspect ratio for
PBP (1) / PBP (2) / Triple (1) / Triple (2) / Quad (1) / Quad (2).
: Output resolution switching button.
▪
Short press the RES button to circularly switch the output
resolution of the HDMI OUTPUT port (Please refer to the
output resolution list of “8. Video & Audio”)
.
▪
Long press the RES button for 3 seconds to switch the output
resolution to 720P60.
