8
߅ࠏҠቔ
How to Use Speakerphone
USB Connec on Steps :
You can connect the power supply equipment with the original power adapter or
connect one end of the USB cable to the USB port of the PC and video
conference system, and connect the other end to the speakerphone.
Batteryindicator
Greenlightoff
Fullybattery
Greenlight
flashing
charging
Red lighton
Low battery
LEDStatusindicator
Bluelighton
USBconnection
Redlighton
Microphone mute status
You can connect the speakerphone and Hub(op onal) by using the original DIN6
data cable, connect one end of the USB cable to the USB port of the PC or video
conference system and connect the other end to the USB socket of the Hub
(op onal),and connect the power supply equipment with the original power
adapter;
Turn on the power bu on a er the connec on was confirmed correct.And wait
for the speakerphone self-check completed.
It will take a few seconds to install the driver automa cally for the first setup.
Turn on the terminal . Third-party conference so ware, and select the
microphone and speaker driver to start the audio and video conference with the
device.
Ba ery charging instruc ons:
You can use DIN6 interface or USB interface of the
speakerphone to charge. When the DIN6 interface and USB interface are used at
the same me, the speakerphone is preferred to use DIN6 interface for charging.
4.
3.
2.
1.
