Rear Panel
4
No.
Name
Function Description
1
INPUT (1-4)
ports
HDMI input ports , connect to HDMI source device such as
DVD or PS4 with an HDMI cable.
2
OUTPUT (1-4)
ports
HDBT
mirrored output ports, connect to HDBaseT Receiver
via CAT cable.
HDMI output ports, connect to HDMI display device such as
TV or monitor with an HDMI cable.
3
Connect to IR receiver cable, the IR receive signal will emit
to the “IR OUT” port of the HDBaseT Receiver.
Connect to IR blaster cable, the IR emit signal is from the
“IR IN” port of the HDBaseT Receiver.
TCP/IP: The link port for TCP/IP control. Connect to an
active Ethernet link with an RJ45 cable.
RS-232: Command control port. Connect to a PC or control
system with a D-Sub 9-pin cable to control the Matrix.
GND
Connect the housing to the ground.
POWER input
Power port
:
Connect to 100~240V AC 50/60Hz power
cable.
Power switch: Press the switch to turn on/off the power.
▪
Illuminating: Matrix and HDBaseT
Receiver are in good connection status.
▪ Flashing:
Matrix and HDBaseT
Receiver are in poor connection status.
▪ Dark:
Matrix and HDBaseT
Receiver are not connected.
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
Data Signal
Indicator Lamp
↑
↑
Connection Signal
Indicator Lamp
7
6
8
4
1
2
AUDIO OUT
(1-4) ports
4 groups of coaxial and balanced analog audio mirrored
output ports. AUDIO OUT (1-4) follows the video output of
OUTPUT (1-4) ports.
4
5
6
7
IR IN (1/2/3/4/
ALL) ports
8
IR OUT (1/2/3/4/
ALL) ports
CONTROL ports
Video (OUT)
- 5 / 25 -
3
5
100-240V AC 50/60HZ
COAX 3
COAX 2
1
IR IN
IR OUT
4
3
2
1
4
3
2
INPUT
CONTROL
AUDIO OUT
ALL
COAX 1
R+
L+
R+
L+
R+
L+
R+
L+
TCP/IP
RS-232
HDMI
HDBT
HDMI
HDBT
HDMI
HDBT
HDMI
HDBT
1
2
3
4
ALL
COAX 4
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
6
