INFOBIT AV
www.infobitav.com
Remote, or from the Web GUI interface.
5.4.2 Selecting Inputs
Manual Selection of the inputs is done by briefly pressing the OUT 1 / OUT
2 / OUT 3 / OUT 4 button repeatedly for that channel until the desired input
is selected.
6. IR Remote
Power on the Switcher or set it to standby mode.
Output 1 (Output 2 / 3 / 4)
1/2/3/4
Select the desired input source to Output 1 port output, the
corresponding green LED on the front panel illuminates.
SD
Switch downscale or bypass mode to the Output
1 port output.
