InfiRay Outdoor
•
Tube TH35/TH50
•
Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Compass
Calibration
Calibrating the digital compass
⚫
Press and hold the rotary encoder
(7)
to enter the main menu.
⚫
Rotate the rotary encoder
(7)
to select the
Compass Calibration
section.
⚫
Press the rotary encoder
(7)
to enter the Compass Calibration interface.
⚫
An icon like a triaxial coordinate system appears on the screen.
⚫
Rotate the scope following the three axes indicated by the icon, with each axis rotating at least
360° within 15 seconds.
⚫
After 15s, the calibration is finished and exit to the home screen.
Settings
This function is used to set the date, time, language, measurement unit, status auto hiding, hue
Switching, factory reset, and device information query.
⚫
Press and hold the rotary encoder
(7)
to enter the main menu.
⚫
Rotate the rotary encoder
(7)
to select the
Settings
option.
⚫
Press the rotary encoder
(7)
to enter the submenu of the settings. This menu item allows you
to configure the following settings.
Date Setting
Setting the system date
⚫
In the
Settings
submenu, rotate the rotary encoder
(7)
to select
the
Date
option.
⚫
Press the rotary encoder
(7)
briefly to activate the date reset function accompanied by two triangle
icons appearing above and below the value.
⚫
Date format is displayed as
YY.MM.DD
format.
