Dual-spectrum Network Bullet Camera User Manual
36
Figure 2.43
No Server-end Storage Alarm Page
Enable Alarm: to start the function of no hard disk detection;
Trigger Alarm Output: to start linkage alarm output.
Image Icon Overlay: to trigger linkage image icon in preview image.
Click “Server-End Storage Error Alarm”, the corresponding settings will be
unfolded beneath, see the following figure:
Figure 2.44
Server-end Storage Error Alarm Page
Enable Alarm: to start the function of hard disk error detection;
Trigger Alarm Output: to start linkage alarm output.
Image Icon Overlay: to trigger linkage image icon in preview image.
2.3.6
Storage Set
【
Storage
】：
select “storage”, the following parameters will be displayed
beneath, see the following figure:
