42
43
2. Short press the
Control Turret
to enter the info submenu which
displays the following information about the BOLT TD50L: GUI
version, SYS Info, boot version, FPGA, PN and SN number,
hardware version, and FCC ID.
3. Long press the
Control Turret
to return to the settings submenu.
27. BASIC INSPECTION
It is recommended to carry out a technical inspection before each
use. Please check the following:
• The rifle scope appearance: there should be no cracks in the
body, or visible damage.
• The condition of the objective lens and eyepiece: there should
be no cracks, greasy spots, dirt or other deposits on the lens.
• The internal rechargeable battery pack should be fully charged.
• The control buttons and turret should be in working order.
• The mount should be tight and correctly installed on the rail.
28. BASIC MAINTENANCE
Always replace the objective lens cap
(15)
after use to avoid
damaging or scratching the lens. Never touch the lens directly; oil
from your skin can damage the lens coating and surface.
Basic maintenance should be carried out at least twice a year and
includes the following steps:
• Wipe the surface of external metal and plastic components
with a clean, dry cotton cloth. Do not use chemical, corrosive,
or abrasive cleaners. Canned air may also be used to clean the
external components.
• Clean the electric contacts and battery slots on the rifle scope
using a non-greasy organic solvent.
• Check the lens and eyepiece. If necessary, remove any dirt
and sand from the optics; a non-contact cleaning method is
preferred.
• Cleaning the exterior of the lens should only be done with the
included microfiber lens cloth or similar product. Only clean the
lens when it is visibly soiled. Frequent wiping or cleaning can
degrade the anti-reflective lens coating.
29. WARRANTY
At iRayUSA we’re first and foremost hunters and users of our
products and we understand that failure isn’t an option. We also
understand that having to wait extended periods for repair isn’t
something that a customer should have to put up with when
something does go wrong. During your published warranty period,
iRayUSA will repair or replace, at its discretion, any optic that
becomes defective during normal use. Additionally, if we cannot fix
your optic in less than one week, we will offer to replace it with a
replacement product in like or better condition. If you would rather
wait for your specific optic to be repaired, we can handle that too.
We know you’ve never seen this from a thermal manufacturer, neither
have we, and that’s why we started iRayUSA.
Our warranty follows the product, and is not tied to the original
owner. The warranty period is tied to the date of sale to the dealer.
This warranty only covers normal use and does not cover cosmetic
damage, normal wear, intentional damage, theft, loss, any act of God,
or a condition caused by use other than intended. Any product that is
modified, opened, or tampered with will void any warranty coverage.
Any serial number damage or alteration on the product will be
considered modification. Be sure to register your BOLT TD50L Series
rifle scope at
To return a product for repair:
1. Go to
and click the
Request an RMA
button
to request an RMA number. Returns will not be accepted
without an RMA.
2. The customer is responsible for shipping the product to
iRayUSA, to the address below. iRayUSA will return the product
at no cost.
iRayUSA
800 Railhead Road #316
Fort Worth, TX 76106
• The one-week timeline starts from the time of receipt of product
at iRayUSA.
• iRayUSA is not liable for any damages or loss incurred when
shipping to iRayUSA.
• This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Please give us a call at
800-769-7125
, or
with any questions.
30. GENERAL TROUBLESHOOTING
The troubleshooting table on the next page lists issues that may
occur when operating the BOLT TD50L Series. Carry out the
recommended troubleshooting steps in the order shown in the table.
Please contact iRayUSA or an authorized vendor for assistance
before attempting to perform any modifications or repairs beyond
the scope of the troubleshooting procedures in this manual.
Unauthorized repairs or modifications will void your warranty.
