AT31F/AT61F Online Temperature Measurement Thermal Camera User Manual
9
7.The 485 transmission between the thermal camera and the PT can be realized
through the RS485 interface on the cable to contron the PT.
8.The ALARMIN interface on the cable can be used to manually input signals to
trigger the alarm.
9.The I/O alarm output of the thermal camera can be realized through the
ALARMOUT interface on the cable. Non-alarm information remains high, and
becomes low when there is alarm information. After the alarm disappears, it will
continue to be maintained for 30 seconds and then return to high level.
10. The client software TAS and VMS are applicable for the thermal camera, which
can realize other functions needed.
The client software TAS can realize the below functions:
⚫
Image capture and video recording
⚫
Thermographic analysis/secondary analysis
⚫
Export recorded infrared data
⚫
Set the parameters and alarm information
⚫
Update firmware to acquire the new functions
The client software VMS can realize the below functions:
⚫
Multiple thermal camera monitoring
⚫
Set parameters and alarm information of a certain thermal camera
⚫
Get the information in the alarm region
